B-Alert Basic
B-Alert is a flow rate indicator and totalizer with continuous flow rate monitoring
Low flow rate and one high flow rate alarm
Display shows flow rate, total, accumulated total and alarm messages
On-screen engineering units are easily configured from a comprehensive selection.
Share as :
Specification
Basic flow rate monitoring with a precise calculation over the full measurement range, where re-transmission of the totalizer and monitoring of the flow rate function is required
- Compact design.
- Displays instantaneous flow rate, total, accumulated total and alarm messages.
- Two alarm values can be entered: low and high flow rate alarm.
- Durable IP65 (Type 4X) field, wall or meter mount enclosure.
- One 20mm (0.79″) and two 16mm(0.63″) knock-out hole cable entries.
- “Know one, know them all” configuration structure.
- Easy reading and programming with clear alphanumerical display.
- Clear 12mm(0.5”) numeric digits and 7mm(0.3”) alphanumeric digits.
- Bright LED backlight.
- Auto backup of settings and running totals.
- Lithium AA battery and 10 – 30V DC power supply.
- Sensor supply: 8.2V DC.
- Easy configurable via PC with free downloadable remote configuration tool and special communication cable (ACE02).
- Various accessories are available for this product.
Signal Inputs
Flow meter input :
Basic types of flowmeter signals: Namur, Reed – switch, NPN, PNP and Sine wave (coil)
Signal outputs
Pulse outputs
- Function: Two configurable pulse outputs according to accumulated total (e.g. a pulse every 3.25 gallons). Frequency: User selectable: Off, long (5Hz/100msec), Intermediate (33Hz/15ms), Short (100Hz/5msec). Type: Two passive transistor output (NPN) – not isolated.
Analog outputs
- Function: Two configurable alarm outputs for low or high flow rate alarms. Type: Two passive transistor output (NPN) – not isolated.
Supply
Power Supply
- A single 3,6V lithium AA battery
- 10 – 30V DC
Sensor Supply
- 8.2 V DC
