Bipolar isolated converter 3117

Application

• The 3117 is an isolating converter that can be used for signal conversion of standard bipolar analog process signals into a unipolar analog signal.
• The unit offers 3-port isolation, provides surge suppression, and protects control systems from transients and noise.
• The 3117 also eliminates ground loops and can be used for measuring floating signals.
• Mounting of the 3117 can be in the Safe area or in Zone 2 and Cl. 1 Div 2 area and is approved for marine applications.

Technical characteristics

• Flexible 24 VDC (±30%) supply via power rail or connectors.
• Excellent conversion accuracy, better than 0.05% of the selected range.
• Inputs and outputs are floating and galvanically separated.
• A green front LED indicates the operation status of the device.
• All terminals are protected against overvoltage and polarity error.
• Meeting the NAMUR NE21 recommendations, the 3117 ensures top measurement performance in harsh EMC environments.
• High galvanic isolation of 2.5 kVAC.
• Fast input to output response time < 7 ms / > 100 Hz – 10 Hz bandwidth damping possible via DIP-switch.
• Excellent signal/noise ratio > 60 dB.

Mounting / installation / programming

• Fast and easy configuration of factory-calibrated measurement ranges via DIP switches.
• A very low power consumption allows DIN rail mounting without needing any air gap.
• Wide temperature operation range: -25…+70°C.

Source: PR3117 Official Page