D016 DIN Panel mount

With linearization and pulse signal output
Display the actual flow rate, total and accumulated total
Total can be reset to zero
Non-resettable accumulated total.
Can register up to 11 digits and is backed-up in EEPROM memory every minute.
Scaled pulse is generated for re-transmitting the count on the display.
Enhanced accuracy in any flow range
Eight linearization points can be entered with their frequencies or values

Share as :

Specification:

Unique, robust IP66, IP67 (NEMA Type4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion

  • Displays flow rate, total and accumulated total.
  • Eight-point linearization of the flow curve – with interpolation.
  • Large 17mm (0.67″) digits for flow rate or total.
  • Selectable on-screen engineering units; volumetric or mass.
  • Ability to process all types of pulse flowmeter signals.
  • Auto backup of settings and running totals.
  • Ambient temperature: -40°C to +80°C (-40°F to 176°F).
  • LED backlight option.
  • Easy configuration with clear alphanumerical display.
  • Aluminum DIN front panel of 144 x 72mm (5.67” x 2.83”) according to DIN 43700 / IEC 61554.
  • Various accessories are available for this product.
  • The D016 fits in flow measurement applications with mechanical flowmeters where a precise calculation over the full measurement range is required and re-transmission of the totalizer function is desired.
  • The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.

Signal Inputs

Flow meter input:

Pulse type inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.

Signal outputs

Pulse outputs

Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).

Max. frequency: 500Hz. Adjustable pulse length from 1 msec. to 10 seconds. Type: One passive signal output, an active signal output or a robust, highly isolated (NO/NC) relay.

Alarm outputs

None

Analog outputs

None

Supply

Power Supply

Basic: 8 – 30V DC (no real sensor supply).
Long life Lithium battery.
4 – 20mA input Loop-powered.
24V AC/DC + sensor supply.
115 – 230V AC + sensor supply.

Sensor Supply

1.2 / 3V DC.
8.2, 12 & 24V DC.

Datasheet

Manual