E126-EG Explosion proof

The E126-EG measures the actual flow, temperature and pressure and converts it with an ideal gas formula to gas volume at reference conditions (e.g. 0°C/1.013Bar or 14.7PSI /60°F). The reference conditions can be configured in the settings. A compressibility factor can be set to approach a real gas behavior.

Share as :

  • Product specifications

    • Signal Inputs

      • Flowmeter Inputs

        • Pulse type inputs:
          Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.

      • Temperature Inputs

        • PT100 – 2, 3 or 4 wire PRTD sensor.
        • (0)4 – 20mA.

      • Pressure Inputs

        • (0)4 – 20mA.

    • Signal Outputs

      • Pulse outputs

        • Function: Scaled pulse output according to corrected accumulated total and unscaled pulse input retransmission. Max. frequency: 500Hz. Retransmission: Minimum pulse duration: 50µs, Adjustable pulse length from 1 msec. Up to 10 seconds.
        • Type: One passive NPN transistor and one isolated electro-mechanical relay.

      • Alarm outputs

        • None.

      • Analog outputs

        • Function: Re-transmitting the corrected flow rate – the output can be scaled to any range (e.g. 200 L/min to 1200 L/min).
        • Type: One galvanically isolated, loop powered 4 – 20mA output.

    • Supply

      • Power Supply

        • Long life Lithium battery.
        • 4 – 20mA. Output loop powered.
        • 9 – 27V DC.

      • Sensor Supply

        • 3, 8.2, 12, 24V DC.

    • Hazardous Area

      • Intrinsically Safe

        • For Intrinsically Safe applications we recommend the F-Series.

      • Explosion Proof

        • ATEX:
          Gas: II 2 G Ex db IIC T6 Gb.
          Dust: II 2 D Ex tb IIIC T85°C Db.
        • IECEX:
          Gas: Ex db IIC T6 Gb.
          Dust: Ex tb IIIC T85°C Db.
        • FM and CSA C-US:
          XP (Explosion-proof): Class I, Division 1, Groups A, B, C, D.
          DIP (Dust-Ignition-proof): Class II/III, Div. 1, Groups E, F, & G.
          Gas: Class I, Zone 1, AEx d IIC T6 Gb.
          Dust: Zone 21, AEx tb IIIC T85°C Db.

    • Communication

      • Function: Reading display information and reading / writing all configuration settings.

      • Type: RS232, RS485 2-wire Modbus RTU or Local USB.

      • Remote configuration via free downloadable remote configuration tool (see dropdown download above).

      • HART communication is available with the E018 Flow rate Monitor / Totalizer.

Datasheet

Manual